Products
Contact Us
- Contact Person : Ms. Ji Xin
- Company Name : Shenzhen Sopto Technology Co., Limited
- Tel : 86-755-36946667
- Fax : 86-755-36946667
- Address : Guangdong,Shenzhen,Building 1, Energy Industrial Zone, Nanshan, Shenzhen, China
- Country/Region : China
- Zip : 518000
Mechanical Splicer
Product Detailed
Related Categories:Fiber Optic Equipment
Related Product Searches:Mechanical Splicer,High Quality,Mechanical Splicer, Optic mechanical splice
Mechanical Splicer
ror indoor cable
tight buffer diameter =0.9mm or coating diameter=0.25mm
good quality
Related Product Searches:Mechanical Splicer,High Quality,Mechanical Splicer, Optic mechanical splice
Mechanical Splice
Image of Mechanical Splice
1.Cut the fiber as shown above.
2.Put the fiber(buffer diameter=0.9mm) into the splicer,Push the tube. 3.Cut the fiber as shown above.
4.Put the fiber(coating diameter=0.25mm) through the reducer into the splicer, Push the tube.
5.Put the fiber (coating diameter=0.25mm) though the reducer into the splicer.
6.Put the fiber (tight buffer diameter=0.9) into the splicer. 7. Press the side cover.
Please select the right product according to the type of optical cable.Ensure the construction enviroment within the limitation.Any problem caused by improper operation will be responsible to the user.The fiber stub could cause injury of skin and should be handled carefully.The dedicated tools should be prepared by the user.
The reducer is used to adapt the fiber (coating diameter=0.25mm) or the splicer.
7. Press the side cover.Mechanical Splicer
