Shenzhen Sopto Technology Co., Limited
Main products:Fiber Optical Transceiver,Media Converter,Network Cards
Products
Contact Us
  • Contact Person : Ms. Ji Xin
  • Company Name : Shenzhen Sopto Technology Co., Limited
  • Tel : 86-755-36946667
  • Fax : 86-755-36946667
  • Address : Guangdong,Shenzhen,Building 1, Energy Industrial Zone, Nanshan, Shenzhen, China
  • Country/Region : China
  • Zip : 518000

Fiber Mechanical Splicer

Fiber Mechanical Splicer
Product Detailed
Fiber mechanical splice for indoor cable tight buffer diameter =0.9mm or coating diameter=0.25mm good quality  

Mechanical Splice

 

Image of Mechanical Splice

1.Cut the fiber as shown above.

2.Put the fiber(buffer diameter=0.9mm) into the splicer,Push the tube. 3.Cut the fiber as shown above.

 

4.Put the fiber(coating diameter=0.25mm) through the reducer into the splicer, Push the tube.

5.Put the fiber (coating diameter=0.25mm) though the reducer into the splicer.

6.Put the fiber (tight buffer diameter=0.9) into the splicer. 7. Press the side cover.

 

 

Please select the right product according to the type of optical cable.Ensure the construction enviroment within the limitation.Any problem caused by improper operation will be responsible to the user.The fiber stub could cause injury of skin and should be handled carefully.The dedicated tools should be prepared by the user.

The reducer is used to adapt the fiber (coating diameter=0.25mm) or the splicer.

7. Press the side cover.

Fiber Mechanical Splicer



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.